Comnet CNGE8FX4TX4MS, Installation And Operation Manual

Page: 51 / 115

45
Port Mirroring Commands Set
Command Level Description Example
monitor rx G Set RX destination port
of monitor function
switch(config)# monitor rx
monitor tx G
Set TX destination port
of monitor function
switch(config)# monitor tx
show monitor P Show port monitor
information
switch# show monitor
monitor
[RX|TX|Both]
I Configure source port
of monitor function
switch(config)#
interface fastEthernet
2
switch(config-if)# monitor RX
show monitor I
Show port monitor
information
switch(config)# interface fastEthernet
2
switch(config-if)# show monitor
no monitor I
Disable source port of
monitor function
switch(config)# interface fastEthernet
2
switch(config-if)# no monitor
802.1x Commands Set
Command Level Description Example
8021x enable G Use the 802.1x global
configuration command
to enable 802.1x
protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x system
radius IP global
configuration command
to change the radius
server IP.
switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x system
server port global
configuration command
to change the radius
server port
switch(config)# 8021x system
serverport 1815
8021x system G Use the 802.1x system switch(config)# 8021x system