Comnet CNGE8FX4TX4MS, Installation And Operation Manual

Page: 41 / 115

35
lacp
workp
[Workport]
[GroupID] :1~4
[Port-list]:Member port
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
[Workport]: The amount
of work ports, this value
could not be less than
zero or be large than the
amount of member
ports.
or
switch(config)#
aggregator group 2
1,4,3 lacp workp 3
aggregator group
[GroupID] [Port-list]
nolacp
G Assign a static trunk
group.
[GroupID] :1~4
[Port-list]:Member port
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
switch(config)#
aggregator group 1
2-4 nolacp
or
switch(config)# aggregator group 1
3,1,2 nolacp
show aggregator P
Show the information of
trunk group
switch# show aggregator 1
or
switch# show aggregator 2
or
switch#
show aggregator 3
no aggregator lacp
[GroupID]
G Disable the LACP
function of trunk group
switch(config)#
no aggreator lacp 1
no aggregator group
[GroupID]
G Remove a trunk group
switch(config)#
no aggreator group 2