29
Commands Level
The following table lists the CLI commands and description.
Modes
Access
Method
Prompt
Exit Method
About This Mode1
User EXEC
Begin a
session with
your switch.
switch>
Enter logout or
quit.
The user commands available at
the user level are a subset of those
available at the privileged level.
Use this mode to
• Perform basic tests.
•Displays system information.
Privileged
EXEC
Enter the
enable
command
while in user
EXEC mode.
switch#
Enter disable to
exit.
The privileged command is
advance mode
Privileged this mode to
•Displays advance function status
• Save configures
Global
Configuration
Enter the
configure
command
while in
privileged
EXEC mode.
switch
(config)#
To exit to
privileged
EXEC mode,
enter exit or
end
Use this mode to configure
parameters that apply to your
switch as a whole.
VLAN
database
Enter the vlan
database
command
while in
privileged
EXEC mode.
switch
(vlan)#
To exit to user
EXEC mode,
enter exit.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the
interface of
fast Ethernet
command
(with a
specific
interface)
while in global
configuration
mode
switch
(config-if)
#
To exit to
global
configuration
mode, enter
exit.
To exist to
privileged
EXEC mode, or
end.
Use this mode to configure
parameters for the switch and
Ethernet ports.
Summary of Contents for CNGE8FX4TX4MS
Page 6: ......
Page 60: ...54 Main interface Main interface...
Page 99: ...93 QoS Configuration interface...
