85
RSTP System Configuration interface
RSTP - Port Configuration
You can configure path cost and priority of every port.
1.
Select the port in Port column.
1.
Path Cost:
The cost of the path to the other bridge from this transmitting bridge at the
specified port. Enter a number 1 through 200000000.
2.
Priority:
Decide which port should be blocked by priority in LAN. Enter a number 0
through 240. The value of priority must be the multiple of 16.
3.
P2P:
Some of the rapid state transactions that are possible within RSTP are dependent
upon whether the port concerned can only be connected to exactly one other bridge (i.e.
it is served by a point-to-point LAN segment), or can be connected to two or more
bridges (i.e. it is served by a shared medium LAN segment). This function allows the P2P
Summary of Contents for CNGE8FX4TX4MS
Page 6: ......
Page 60: ...54 Main interface Main interface...
Page 99: ...93 QoS Configuration interface...
