Comnet CNGE8FX4TX4MS, Installation And Operation Manual

Page: 47 / 115

41
IGMP Commands Set
Command Level Description Example
igmp enable G Enable IGMP snooping
function
switch(config)# igmp enable
igmp query auto G
Set IGMP query to auto
mode
switch(config)# igmp query auto
igmp query force G Set IGMP query to force
mode
switch(config)# igmp query force
Show igmp
configuration
P Displays the details of
an IGMP configuration.
switch#
show igmp configuration
Show igmp multi P Displays the details of
an IGMP snooping
entries.
switch#
show igmp multi
no igmp G
Disable IGMP snooping
function
switch(config)# no igmp
no igmp query G Disable IGMP query switch# no igmp query
Mac / Filter Table Commands Set
Command Level Description Example
mac-address-table
static hwaddr
[MAC]
I
Configure MAC address
table of interface
(static).
switch(config)# interface fastEthernet
2
switch(config-if)# mac-address-table
static hwaddr 000012345678
mac-address-table filter
hwaddr
[MAC]
G
Configure MAC address
table(filter)
switch(config)# mac-address-table
filter hwaddr 000012348678
show
mac-address-table
P
Show all MAC address
table
switch# show mac-address-table
show
mac-address-table
static
P Show static MAC
address table
switch#
show mac-address-table
static
show
mac-address-table filter
P Show filter MAC
address table.
switch#
show mac-address-table
filter
no mac-address-table
static hwaddr
I Remove an entry of
MAC address table of
switch(config)#
interface fastEthernet
2