98
Enable Coupling Ring:
To enable the coupling ring function, select the check box that
enables the coupling ring function.
Coupling port:
Assign the member port.
Control port:
Set the switch as the master switch in the coupling ring.
Enable Dual Homing:
Set up one of port on the switch to be the Dual Homing port. In
an X-Ring group, the maximum number of Dual Homing ports is one.
Dual Homing only
work when the X-Ring function is enabled.
And then, select
to apply the configuration.
X-ring Interface
Note
1. When the X-Ring function is enabled, the user must disable the RSTP
first. X-Ring and RSTP function cannot be active at the same time.
2. Remember to execute the ‘Save Configuration’ action, otherwise the
new configuration will lose when switch powers off.
Summary of Contents for CNGE8FX4TX4MS
Page 6: ......
Page 60: ...54 Main interface Main interface...
Page 99: ...93 QoS Configuration interface...
