68
IP Security
The IP security function allows user to assign 10 specific IP addresses that have permission
to access the switch through the web browser for the securing switch management.
IP Security Mode:
when this option is in the
Enable
mode, the
Enable HTTP Server
and
Enable Telnet Server
check boxes will then be available.
Enable HTTP Server:
when this check box is checked, the IP addresses among
Security IP1 ~ IP10 will be allowed access via HTTP service.
Enable Telnet Server:
when checked, the IP addresses among Security IP1 ~ IP10 will
be allowed to access via telnet service.
Security IP 1 ~ 10:
Assign up to 10 specific IP address. Only these 10 IP address can
access and manage the switch through the Web browser
And then, select
button to apply the configuration
Note
Remember to execute the ‘Save Configuration’ action, otherwise the new
configuration will be lost when switch is powered off
IP Security interface
Summary of Contents for CNGE8FX4TX4MS
Page 6: ......
Page 60: ...54 Main interface Main interface...
Page 99: ...93 QoS Configuration interface...
