CommPact Control system, Installation Manual

Page: 20 / 148

3 Basic System Operation
CommPact Installation Manual
16
In descriptor editing, used to insert a space before the current character
In phone number editing, used to enter "T", ",", "P", "+", "*", "#".
In account number editing, used to enter Hexadecimal digits (A-F).
Toggles item descriptors and default names.
In the event log, toggles the time/date stamp.
Toggles AM and PM when setting the time in 12hr format.
In descriptor and phone number editing, used to delete the current
character
Used to scroll backwards in the current menu level.
For Global Chime and Message Center features, used to access
shortcuts.
+ (Global Chime shortcut)
+ Χ (Record Message shortcut, front panel keypad only)
+ √ (Play Message shortcut, front panel keypad only)
Used to scroll forwards in the current menu level.
During standby, used to scroll through the list of system trouble
conditions.
3.4. LCD Display
The LCD display provides you with a detailed interface for operation and programming.
3.4.1. Standby Mode
Standby mode can be defined as the state the system is in when it is unset and not in Menu mode.
In Standby mode, the set status, system status, or banner is displayed. If system status is normal,
the current time is displayed.
Table 3-4: Set Status
Item Description
UNSET The system is unset.
FULL SET
The system has been set using the displayed setting method. PART SET
PERIMETER SET
PART SET INST
The system has been set using the displayed setting method with the Instant set
feature activated.
PERIM SET INST
FULL SETTING
The system is in the process of setting (displayed during exit delay). PART SETTING
PERIMETER SETTING