CommPact Control system, Installation Manual

Page: 26 / 148

3 Basic System Operation
CommPact Installation Manual
22
The following example shows an Set Status Reply message reporting that the system was fully set
by Master User.
F U L L S E T - M A S T E R U S E R
3.7.5. Remote Setting/Unsetting via DTMF
Using the Telecontrol feature, you can set and unset the system via the telephone with DTMF
commands. For further information on the Telecontrol features, see p. 35,
5.1.5 Set/Unset DTMF
Commands.
3.7.6. Remote Setting/Unsetting via WUAPP
You can set and unset the system remotely using the WUAPP (Web User Application) – see p.
Error! Bookmark not defined. , Error! Reference source not found. .
3.7.7. Alarm Activation
In the event of an emergency, the user can generate three kinds of alarms from the front panel
keypad, wireless keypad, or keyfobs.
To activate an SOS Panic alarm from the
Keyfob EL-2714E:
•
Press B1 and B2 buttons
simultaneously.
Figure 3-6: SOS Panic Alarm Activation (EL-2714E)
To activate an SOS Panic alarm from the front
panel keypad:
•
Press and hold down both SOS
buttons simultaneously.
Figure 3-7: SOS Panic Alarm Activation (Front Keypad)
To activate a Fire alarm from the front panel
keypad:
•
Press and hold down buttons 1
and 3 simultaneously.
Figure 3-8: Fire Alarm Activation
To activate a Medical alarm from the front
panel keypad :
•
Press and hold down buttons 4
and 6 simultaneously.
Figure 3-9: Medical Emergency Alarm Activation