Comm-Tec UP-82TS, User Manual

Page: 50 / 56

Seamless Switcher
Comm-tec Srl 50 www.comm-tec.it
10. Firmware Upgrade
Please follow the steps as below to upgrade firmware by the FIRMWARE port on the rear
panel:
1) Prepare the
latest upgrade file (.bin) and rename it as “USERAPP.bin” on PC.
2) Power off the switcher, and connect the FIRMWARE port of switcher to the PC with
USB cable.
3) Power on the switcher, and then the PC will automatically detect a U-disk named of
“BOOTDISK”.
4) Double-click the U-
disk, a file named of “READY.TXT” would be showed.
5) Directly copy the
latest upgrade file (.bin) to the “BOOTDISK” U-disk.
6) Reopen the U-
disk to check the filename “READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully, otherwise,
the firmware updating is fail, the name of upgrade file (.bin) should be confirm again,
and then follow the above steps to update again.
7) Remove the USB cable after firmware upgrade.
8) After firmware upgrade, the switcher should be restored to factory default by sending
command.