Seamless Switcher
Comm-tec Srl
14
www.comm-tec.it
⑦
HDBT OUT:
RJ45 port to
connect the
HDBT IN
port of switcher by CATx Ethernet
cable.
⑧
DC 12V:
DC barrel connector for the power adapter connection.
3.4 Receiver Front and Rear Panel
①
MODE SWITCH:
Put the Mode switch in the
CTRL
position for normal operation and
to allow RS232 control pass-through. Put the switch in the
UPDATE A
position to
update the Valens IC program. Finally, put the switch in the
UPDATE B
position to
update the compression IC program.
②
POWER LED:
The LED illuminates red when power is applied.
③
HDMI OUT:
Type-A female HDMI port to connect the display device.
④
RS232:
3-pin terminal block to connect the RS232 control device (e.g. PC) or a device
to be controlled by RS232 commands.
⑤
IR IN:
3.5mm jack to connect the IR receiver for IR pass-through.
⑥
IR OUT:
3.5mm jack to connect the IR emitter for IR pass-through.
⑦
HDBT IN:
RJ45 port to connect the
HDBT OUT
port of switcher by CATx Ethernet
cable.
⑧
DC 12V:
DC barrel connector for the power adapter connection.
CTRL
UPDATE B
UPDATE A
DC 12V
Tx
Rx
HDMI OUT
HDBT IN
IR OUT
IR IN
1
2
3
4
5
6
7
8
Summary of Contents for UP-82TS
