Comm-Tec UP-82TS, User Manual

Page: 31 / 56

Seamless Switcher
Comm-tec Srl 31 www.comm-tec.it
2) Command
⚫
Select Local , HDBT In or HDBT Out control mode.
✓
Local: Send RS232 commands to control the local third-party which is connected to
the RS232 port of the switcher.
✓
HDBT In: Send RS232 commands to control the far-end third-party which is
connected to the RS232 port of HDBaseT transmitter.
✓
HDBT Out: Send RS232 commands to control the far-end third-party (e.g. projector)
which is connected to the RS232 port of HDBaseT receiver.
⚫
Select HEX or ASCII format.
⚫
Baud Rate: Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200.
⚫
Command Ending: NULL , CR , LF or CR+LF can be chosen.
⚫
Command: Type command in this textbox to control the third-party device.
⚫
Trigger On: Type Power On command in this box to turn on the third-party device.
⚫
Trigger Off: Type Power Off command in this box to turn off the third-party device.