Comm-Tec UP-82TS, User Manual

Page: 43 / 56

Seamless Switcher
Comm-tec Srl 43 www.comm-tec.it
8.2.10 CEC Control
If the input sources and displays support CEC, they can be controlled by sending CEC
commands to replace IR remote.
Step 1: According to the below command to enable CEC control.
Command Description Feedback Example
CECON. Enable CEC CEC Turn ON!
CECOFF. Disable CEC CEC Turn OFF!
Step 2: According to the below command format to send specific command to control input
source or display device.
CEC[I/O][port][command].
⚫
The “
[I]
” represents the input port. The “
[O]
” represents the output port.
⚫
The “
[port]
” represents the port number. The input ports are 01~05, and the output
ports are 06~08.
⚫
The “
[command]
” represents the specific command from the table below.
✓
Control the input source:
Command Description Example and Feedback
CECI[port]00. Confirm operation (Enter).
CECI0100.
[CEC]: blue ray OK.
CECI[port]01. UP.
CECI0101.
[CEC]: blue ray up.
CECI[port]02. DOWN.
CECI0102.
[CEC]: blue ray down.
CECI[port]03. LEFT.
CECI0103.
[CEC]: blue ray left.
CECI[port]05. RIGHT.
CECI0105.
[CEC]: blue ray right.
CECI[port]09. Back to submenu. CECI0109.