Comm-Tec UP-82TS, User Manual

Page: 30 / 56

Seamless Switcher
Comm-tec Srl 30 www.comm-tec.it
7.7 RS232 Control
1) Port Mode
⚫
HDBT Transmitter Pass Through: Establish RS232 pass-through communication
between the switcher and HDBaseT receiver (e.g.TPUH610AR). The RS232 port of the
switcher can be used to transfer commands to control the third-party device which is
connected to the HDBaseT receiver.
⚫
HDBT Receiver Pass Through: Establish RS232 pass-through communication
between the switcher and the HDBaseT transmitter (e.g. TPUH610AT). The RS232 port
of the switcher can be used to transfer commands to control the third-party device
which is connected to the HDBaseT transmitter.
⚫
Local Control: The RS232 port of the switcher is used to connect control device (e.g.
PC) to control the switcher.