Comm-Tec UP-82TS, User Manual

Page: 42 / 56

Seamless Switcher
Comm-tec Srl 42 www.comm-tec.it
8.2.8 VGA Output Image Adjustment
When 6-VGA source is selected, the below commands can be used to adjust the output
picture.
Command Description Feedback Example
SetVGAPhase:XX. Set the phase position to XX. XX=0~100.
SetVGABrightness: XX. Set the brightness to XX. XX=0~100.
SetVGAContrast: XX. Set the contrast to XX. XX=0~100.
SetVGAColor: XX. Set the color to XX. XX=0~100.
SetVGAAutoSync:X.
X=0, Disable Auto-Sync mode.
X=1, Enable Auto-Sync mode.
SetVGASharpness:XX. Set the sharpness to XX. XX=0~100.
SetVGAColorTemp:X.
Auto-adjust the color temperature to X.
X=0~3 (Normal/Cool/Warm)
SetVGAAspetRatio:X.
Set the aspect ratio to X. X=0~2 (16:9/
4:3/auto)
SetVGAPicMode:X.
Set the image mode to X. X=0~3.
(dynamic/standard/mild/user)
8.2.9 Switcher Baud Rate Setting
Command Description Feedback Example
Baudrate 2400.
Set the RS232 baud rate of switcher to
2400.
Set Local RS232 baudrate is
2400!
Baudrate 4800.
Set the RS232 baud rate of switcher to
4800.
Set Local RS232 baudrate is
4800!
Baudrate 9600.
Set the RS232 baud rate of switcher to
9600.
Set Local RS232 baudrate is
9600!
Baudrate 19200.
Set the RS232 baud rate of switcher to
19200.
Set Local RS232 baudrate is
19200!
Baudrate 38400.
Set the RS232 baud rate of switcher to
38400.
Set Local RS232 baudrate is
38400!
Baudrate 57600.
Set the RS232 baud rate of switcher to
57600.
Set Local RS232 baudrate is
57600!
Baudrate 115200.
Set the RS232 baud rate of switcher to
115200.
Set Local RS232 baudrate is
115200!