Comm-Tec UP-82TS, User Manual

Page: 12 / 56

Seamless Switcher
Comm-tec Srl 12 www.comm-tec.it
3.2 Matrix Switcher Rear Panel
①
INPUT: Total eight video inputs, five audio inputs and one IR input.
⚫
1-HDBT: RJ45 port to connect the TPUH610AT transmitter to receive AV signal, IR
and RS232 control signal, and one external balanced audio input (5-pin) can be
embedded in the HDBT video. In addition, the HDBT input supports 24V PoC.
⚫
2-HDMI: Type-A female HDMI port to connect the HDMI source. One external
balanced audio input (5-pin) can be embedded in the HDMI video.
⚫
3-HDMI: Type-A female HDMI port to connect the HDMI source. One external
balanced audio input (5-pin) can be embedded in the HDMI video.
⚫
4-HDMI: Type-A female HDMI port to connect the HDMI source.
⚫
5-HDMI: Type-A female HDMI port to connect the HDMI source.
⚫
6-VGA: 15-pin female VGA port to connect the VGA source. One stereo auxiliary
audio input (3.5mm jack) can be embedded in the VGA video.
⚫ 7-DP: Type-A female DP port to connect the DP source.
⚫
8-USB-C: Type-C USB port to connect the device with SlimPort output, e.g.
Macbook.
⚫
IR IN: 3.5mm jack to connect the IR receiver for IR pass-through.
⚫
MIX: 5-pin terminal block to connect the audio source for global audio mixing.
②
OUTPUT:
⚫
1-HDMI: Type-A female HDMI port to connect the video display.
⚫
2-HDMI: Type-A female HDMI port to connect the video display.
⚫
2-HDBT: RJ45 port to connect the TPUH610AR receiver to transmit AV signal, IR
and RS232 control signal. The HDBT output supports 24V PoC.
Note: The 2-HDMI and 2-HDBT ports output the same signal.
⚫
IR IN: 3.5mm jack to connect the IR receiver for IR pass-through.
⚫
IR OUT: 3.5mm jack to connect the IR emitter for IR pass-through.
③ AUDIO OUTPUT:
6. VGA 8. USB-C AUDIO 7. DP DC 24V
OUTPUTS
2. HDBT IR IN 1. HDMI
TCP/IP
CONTROL
IR EYE FIRMWARE
1
L R L R
IR OUT 2. HDMI 5. HDMI 4. HDMI 2. HDMI 3. HDMI 1. HDBT IR IN
L R L R L R
MIX
L R
INPUTS
2
RS232
Tx Rx
RELAY1
NO COM NC
RELAY2
NO COM NC
AUDIO OUT
1
2
5
3
4