Comm-Tec UP-82TS, User Manual

Page: 37 / 56

Seamless Switcher
Comm-tec Srl 37 www.comm-tec.it
8.2 RS232 Communication Command
Communication protocol: RS232 Communication Protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Note:
⚫
All commands not need to end with
“ <CR><LF>”.
⚫
In the commands, “[”and “]” are symbols for easy reading and do not need to be typed in
actual operation.
⚫
Please remember to end the commands with the ending symbols “.” or “;”.
⚫
Type the command carefully, it is case-sensitive.
8.2.1 Device Control
Command Description Feedback Example
PWON. Power on system. PWON
PWOFF.
Power off system. Turn off HDBaseT power
supply.
PWOFF
STANDBY.
System standby. Press any button to
awake.
STANDBY
/*Type; Report system model. UP-82TS
/^Version; Report firmware version. V1.0.0
/%Lock; Lock front panel buttons. System Locked
/%Unlock; Unlock front panel buttons. System Unlock!
%9964. Report IP address. IP:192.168.0.178
USBUpdata:[x].
Upgrade the 3458 IC. After successfully
upgrading, send the command “SPI:15,0.”
to turn off the serial communication
between the 3458 IC and control PC.
%9961. Report the system locking status. System UnLock/Lock!
%9962. Report the system power status. PWON/PWOFF/STANDBY
%9963. Report the IR carrier mode. Carrier native
%0911. Reset to factory default.