Seamless Switcher
Comm-tec Srl
13
www.comm-tec.it
⚫
1:
One balanced audio output (5-pin) and one digital SPDIF audio output for
1-HDMI output audio de-embedding.
⚫
2:
One balanced audio output (5-pin) and one digital SPDIF audio output for
2-HDBT output audio de-embedding.
④
CONTROL:
⚫
RS232:
3-pin terminal block to connect the control device (e.g. PC) to control the
switcher by sending RS232 commands. It also supports RS232 pass-through
control.
⚫
RELAY 1-2:
Two 3-pin terminal blocks to connect the relay devices (e.g. projector
screen).
⚫
IR EYE:
3.5mm jack to connect IR receiver to control the switcher by the IR
remote.
⚫
TCP/IP:
RJ45 port to connect the control device (e.g. PC) to control the switcher by
GUI.
⚫
FIRMWARE:
Type-A USB port for firmware upgrade.
⑤
DC 24V:
DC barrel connector for the power adapter connection.
3.3 Transmitter Front and Rear Panel
①
MODE SWITCH:
Put the Mode switch in the
CTRL
position for normal operation and
to allow RS232 control pass-through. Put the switch in the
UPDATE A
position to
update the Valens IC program. Finally, put the switch in the
UPDATE B
position to
update the compression IC program.
②
POWER LED:
The LED illuminates red when power is applied.
③
HDMI IN:
Type-A female HDMI port to connect the HDMI source.
④
RS232:
3-pin terminal block to connect the RS232 control device (e.g. PC) or a device
to be controlled by RS232 commands.
⑤
IR IN:
3.5mm jack to connect the IR receiver for IR pass-through.
⑥
IR OUT:
3.5mm jack to connect the IR emitter for IR pass-through.
CTRL
UPDATE B
UPDATE A
Tx
Rx
DC 12V
IR OUT
IR IN
HDBT OUT
HDMI IN
1
2
3
4
5
6
7
8
Summary of Contents for UP-82TS
