Comm-Tec UP-82TS, User Manual

Page: 46 / 56

Seamless Switcher
Comm-tec Srl 46 www.comm-tec.it
HDBaseT transmitter.
⚫ Y=2, HDBT Receiver Pass
Through: Establish RS232
pass-through communication
between the switcher and HDBaseT
receiver (e.g.TPUH610AR). The
RS232 port of the switcher can be
used to transfer commands to
control the third-party device which
is connected to the HDBaseT
receiver.
/+[Y]/[X]:******.
⚫ xxx: ASCII characters.
⚫
Y: Represents the RS232 port.
1)
Y=1: The RS232 port of switcher.
2)
Y=2: The RS232 port of HDBaseT
receiver.
3)
Y=3: The RS232 port of HDBaseT
transmitter.
⚫ X: Represents the baud rate of
third-party device.
1)
X=1, 2400
2)
X=2, 4800
3)
X=3, 9600
4)
X=4, 19200
5)
X=5, 38400
6)
X=6, 57600
7)
X=7, 115200
/+3/3:123456.
Send the command “123456” to the
third-party device. The baud rate is
9600.