Comm-Tec UP-82TS, User Manual

Page: 38 / 56

Seamless Switcher
Comm-tec Srl 38 www.comm-tec.it
8.2.2 Source Switching
Command Description Feedback Example
Demo.
Switch to demo testing mode, switch AV
1>1, 2>2 and so on.
Demo Mode AV:
AV: 1-> 1
AV: 1-> 2
…
AV: 1-> 7
AV: 1-> 8
AV: 2-> 1
AV: 2-> 2
…
AV: 2-> 7
AV: 2-> 8
Normal Mode
Undo. Cancel the previous operation. Undo Ok!
[x]All.
Switch input [x] to HDMI and HDBT outputs.
x=1~4.
Example: 4ALL.
Feedback: 4 To All
All#.
Switch all input signal to the corresponding
output channel. 1->1, 2->2
All Through.
All$. Turn off all output. All Closed.
[x]#. Switch input [x] to output [x]. x=1~2. 1 Through
[x]$. Turn off output [x]. x=1~2. 1 Closed.
[x]@. Turn on output [x]. x=1~2. 01 Open.
All@. Turn on all outputs. All Open
[x]B[y]. Switch input [x] to output [y]. x=1~8, y=1~2. AV: 1-> 1
%9975. Report the source switching status.
Out 1 2
In 4 4
Status[x]. Report the output [x] status. x=1~2 AV: 5-> 1
Status.
Report the input channel on output channel
one by one.
AV:01->01
AV:01->02
%9971.
Report the connection status of all inputs.
Y means the corresponding input port is
connected to a source device, N means
not.
In 01 02 03 04
Connect Y Y N N
In 05 06 07 08
Connect N N N Y
AutomationON[X].
Enable the auto switching mode for the
output [X].
X Output Port
1 HDMI
2 HDBT
HDMI Automation ON
HDBT Automation ON