IE-LGR-Uxxxx-16
11
Record status
- offers information on whether the recording is ON
and whether it is just running.
A continuous recording with a preset interval is ON and running.
The recording is ON in the device and it is running at present.
This kind of display is utilized, when the record activity is dependent
on the alarm or the external input condition.
The recording is ON in the device but it is not running at present.
For instance, the rrecording is ON during an alarm only, and there
is no alarm just now. Or, a recording is ON that is controlled by
an external input which not active at the moment.
The LOG symbol is not displayed: The recording is OFF in the
device. The recording is not allowed in any channel in the device’s
configuration.
Meaning of the values displayed
- this item specifies the meaning
of the measured values displayed in the two main rows. Beside the currently
measured values the device will also evaluate the minimum and maximum
values from their last resetting by the user.
If the device is OFF and has not
been running for some time, then, after it is turning ON, the value of Min /
Max is then set to the values before switching OFF.
It can be pre-set
in the device configuration, whether and in what manner these Min/Max
values will be displayed by the device. Remember that the Min/Max
in question are different from those being recorded.
Neither MIN nor MAX is displayed. You can see values that have
been currently measured.
In both display rows you can see the minimum values measured
since their last resetting by the user.
In both display rows you can see the maximum values measured
since their last resetting by the user.
Alarm condition
- this item provides instant information that at least one
of the alarms which have been pre-set is active. Alarms can be generated by
exceeding the limits that have been pre-set in individual channels. Moreover,
they can notify of a device failure. In the device configuration you can pre-
set which conditions should be considered as alarm generating. By means
of the upper key you can easily browse through the values measured in all
device channels (if enabled in device configuration). In the case that
the value is preceded by a bell-like icon, the pre-set limits (alarms) have been
exceeded in this channel.
Summary of Contents for U0110
