Comet U0110, User Manual

Page: 15 / 74

IE-LGR-Uxxxx-16
15
Models produced
The models produced differ from one another by types and ranges of values to be
measured. The datalogger’s input channels are invariably assigned to these values.
The user cannot change the measured quantities and their ranges.
U0110
One-channel thermometer
This model is equipped with only one internal
temperature sensor, no additional probes and sensors
can be connected. It is characterized by a simple
and compact design and a relatively long response to
a temperature change. The device is placed directly
in the measured area. The battery in the device cannot
be charged.
U0122
Two-channel thermometer
with external probe
This model allows to measure the temperature
of the internal sensor and one external probe series
Pt1000/E. The response to a temperature change
depends on the connected probe design but is usually
much faster than the response of the internal sensor. It
is often used, among other things, to monitor large areas
where a device requiring individual monitoring is
located. The maximum length of each probe lead should
not exceed 15 m. It is recommended to use shielded
cables. To maintain the IP rating, the unused probe
connectors should be provided with a supplied closing
cap.
The battery in the device cannot be charged.