Comet U0110, User Manual

Page: 13 / 74

IE-LGR-Uxxxx-16
13
Measured value (upper and lower row) - the currently measured value(s)
(or the Min/Max values) are displayed if the corresponding symbols
in the upper display section are illuminated. The unit name and the measured
value symbol (1, 2, 3, 4, INT, EXT) are pre-set by the producer, the user
cannot change them. In addition, it is factory pre-set whether the measured
value of a particular channel will be displayed in the lower or upper display
unit row. On the other hand, the user has many possibilities to adjust
the appearance and b
ehaviour of individual „screens“. Controlling them can
take place only manually by the aid of push buttons situated beside
the display unit. The upper push button serves to toggle between
the
measured values („the screens“):
The lower push button serves to toggle between the currently measured
values and the Min/Max values:
The device can also be set up to toggle the „screens“ automatically,
in for about 5 sec interval. The cycle can be interrupted by pressing a key.
If you do not want to use the keypad, you can disable it in the device settings.