coldline W10T, Maintenance Handbook

Page: 34 / 96

34
It
a
lia
n
o
E
n
g
lis
h
D
e
u
tc
h
F
ra
n
ça
is
Р
у
сс
к
и
й
9.0 PROGRAMS
9.1 CREATING A NEW PROGRAM
If the product comes in small portions, the needle probe cannot be used and, moreover, cooling is quick and
will take much less than the maximum time. In such cases, it is a good idea to store a program with a
predefined time.
Using the programs feature, you can store up to 99
99 99
99 customized blast chilling/blast freezing cycles, with a time
preset by the user for each.
Shortcut commands while in standby mode
Shortcut commands while in standby mode Shortcut commands while in standby mode
Shortcut commands while in standby mode
1
Soft blast chilling
1
Hard blast chilling
1
Blast freezing
2
Time-based cycle
3
Select time
3
Select time
4
Save
Detai
Detai Detai
Detailed commands sequence
led commands sequence led commands sequence
led commands sequence::::
1. Make sure the appliance is in standby standby standby standby mode (6.1 6.1 6.1 6.1).
2. Select a soft or hard blast chilling cycle or blast freezing cycle by pressing button , or
respectively.
3. Press button to select a time-based cycle.
4. Use buttons and to set the desired cycle time.
5. Hold button down for 5555 seconds to enter the program menu.
•
DY1
DY1 DY1
DY1 reads «P1
P1 P1
P1»; DY2
DY2 DY2
DY2 shows the default
default default
default cycle time or «P1
P1 P1
P1» if it has already been saved before.
6. Use buttons and to select the number of the available program.
•
Led , or lights to indicate the kind of cycle the program refers to.
7. Hold button down for 5555 seconds to store cycle in the memory.
9.2 CALLING UP AN EXISTING PROGRAM
Shortcut commands while in standby mode Shortcut commands while in standby mode Shortcut commands while in standby mode Shortcut commands while in standby mode
1
Programs
2
Select program
2
Select program
3
Start