manualshive.com logo in svg

Colasit CMVpro 125, Operating Instructions Manual, Page: 26 / 76

Share
Download
Colasit CMVpro 125 Operating Instructions Manual Download Page 26

4 | Structure and function

26 / 76

Operating instructions CMVpro 125-400 | Version 1-en

4.3.10

Motor cover

• Optional accessory able to be retrofitted.

• Protects electric motor or electric motor with at-

tached FC (accessory) from the weather.

• For mounting instructions 

_

 Chap. 7.5 [

}

 46].

Fig. 14: 

Motor cover

4.3.11

Protective grid

•

Required accessory for free sucking and/or
blowing out installation,

 as access and safety

protection.

• Gets permanently installed (welded) to the free-

sucking inlet connection and/or to the blowing 
outlet connection.

• Entry protection as well as protection against in-

filtration of contamination and foreign objects 
(IP20 degree of protection).

•

NOTICE

 Protective grid not suitable for con-

nection to ductwork (increased pressure loss).

Fig. 15: 

Protective grid

4.3.12

Hub seal

• Optional.

• Use with hazardous, aggressive

conveyed media when the fan is
operated in an overpressure condi-
tion.

• Wear part

• For mounting instructions, see

_

 Chap. 11.9 [

}

 66].

Fig. 16: 

Hub seal

Summary of Contents for CMVpro 125













































































Reviews:

No comments