manualshive.com logo in svg

Colasit CMVpro 125, Operating Instructions Manual, Page: 15 / 76

Share
Download
Colasit CMVpro 125 Operating Instructions Manual Download Page 15

Essential safety instructions | 3

Operating instructions CMVpro 125-400 | Version 1-en

15 / 76

3

Essential safety instructions

The associated documents can contain additional operating instructions with im-
portant safety instructions 

_

 Chap. 1.1 [

}

 6].

3.1

Notation of safety instructions

The safety instructions and warnings in these operating instructions are identi-
fied by the following warning symbols, signal words, and colors (electronic ver-
sion of the operating instructions only), which convey the severity of the dan-
gers.

Death or serious injuries

DANGER

 Danger to life due to... !

Outcome of the danger upon noncompliance...

▪ Conditions for prevention of the danger...

u

Measures for prevention of the danger...

This safety instruction, the highest danger level, denotes a direct and immediate
dangerous situation. This indicates a hazardous situation which, if not avoided,
will result in death or serious injury.

Serious injuries

WARNING

 Risk of injury due to... !

Outcome of the danger upon noncompliance...

▪ Conditions for prevention of the danger...

u

Measures for prevention of the danger...

A safety instruction of this danger level denotes a possible dangerous situation.
This indicates a hazardous situation which, if not avoided, could result in death
or serious injury with lasting effects.

Minor injuries

CAUTION

 Bodily injuries due to... !

Outcome of the danger upon noncompliance...

▪ Conditions for prevention of the danger...

u

Measures for prevention of the danger...

A safety instruction of this danger level denotes a possible dangerous situation.
This indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury, possibly with lasting effects.

Material damage

NOTICE

 Material damage due to... !

Outcome of the danger upon noncompliance...

▪ Conditions for prevention of the danger...

u

Measures for prevention of the danger...

This warning instruction informs of a dangerous situation that can damage the
fan or or lead to other material damage.

Summary of Contents for CMVpro 125













































































Reviews:

No comments