Cognex In-Sight 7600, Reference Manual

Page: 39 / 113

Install the S-Mount/M12 Manual Focus Lens
Complete the following steps to install an In-Sight S-Mount/M12 manual focus lens. The S-Mount/M12 adapter kit (ISLN-
7000-SMNT) is required when installing In-Sight S-Mount/M12 manual focus lenses.
Note :
l
The DataMan clear cover accessory (DM300-CLCOV) is supported with In-Sight S-Mount/M12 manual focus
lenses and provides an IP65 rating. For more information, see S-Mount/M12 Manual Focus Accessories on
page 17 .
l
For the In-Sight 7905, the vision system image circle is larger than the S-Mount/M12 lenses used in the
autofocus module (ISAF-7000-8mm) and the S-Mount/M12 adapter kit (ISLN-7000-SMNT), resulting in
mechanical vignetting in the image when using any S-Mount/M12 lens. Therefore, S-Mount/M12 lenses are
not recommended. For more information, see Mechanical Vignetting on page 110 .
1. Remove the rubber faceplate covering the image sensor window, if present.
2. Remove the protective film covering the threaded lens opening, if present.
3. Place the S-Mount adapter over the image sensor window.
4. Place the "In-Sight" end of the adapter tool on the adapter. Turn clockwise until tight.
5. Remove the adapter tool.
39
Installation