4. Remove the keyed light baffle.
Note
: This step includes an optional bandpass filter accessory installed to the light baffle. For more
information, refer to
In-Sight Lenses, Lights and Covers
.
5. The light housing contains four captive screws that are accessible via captive screw access holes in the LED ring
light board. Use a 2mm hex wrench to loosen the four captive screws and remove the light housing.
CAUTION
:
l
Do not hot-plug the LED ring light. Verify the vision system is not receiving power when connecting
or disconnecting the LED ring light.
l
A connector protrudes from the underside of the light housing and can be damaged if placed on a
hard surface.
62
Installation
Summary of Contents for In-Sight 7600
Page 1: ...In Sight 7000 Gen2 Series Vision System Reference Guide 2020February06 Revision 5 8 1 2...
Page 42: ...42 Installation...
Page 43: ...43 Installation...
Page 113: ......