Cognex In-Sight 7600, Reference Manual

Page: 38 / 113

8. Install the light baffle.
a. Tilt the light baffle toward the light housing and maneuver the light baffle past the top of the LED ring light
structure.
b. Compress the light baffle and maneuver the bottom of the light baffle past the bottom of the LED ring light
structure until the light baffle snaps into place, with the keyed tabs sitting flush over each light housing
captive screw access hole.
9. Install the cover.
a. Place the cover on the light housing.
b. Align the central clear region of the cover with the light baffle edges.
c. Insert the four M3 x 12mm screws and use a 2mm hex wrench to torque screws to 0.31 Nm (2.75 in-lb).
38
Installation