Specifications
7900
7900C
7901
7901C
7902
7902C
Discrete Inputs
l
3 general-purpose inputs when connected to the Breakout cable.
1
l
8 general-purpose inputs available when connected to the CIO-MICRO I/O Module via
the I/O Module cable.
l
7 general-purpose inputs available when connected to the CIO-1400 I/O Expansion
Module via the I/O Module cable.
Discrete Outputs
l
4 high-speed outputs when connected to the Breakout cable.
2
l
2 high-speed outputs, plus 8 general-purpose outputs available when connected to
the CIO-MICRO I/O Module via the I/O Module cable.
l
2 high-speed outputs, plus 6 general-purpose outputs available when connected to
the CIO-1400 I/O Expansion Module via the I/O Module cable.
Status LEDs
SD Card Status, Pass/Fail LED and Indicator Ring, Network LED and Error LED.
Internal LED Ring Light White, Red, Blue or IR LED ring light used with the illumination accessory (ISLM-7000-xxx).
l
White LED color temperature: 4000 K
l
Red LED wavelength: 617 nm
l
Blue LED wavelength: 455 nm
l
IR LED wavelength: 850 nm
Note
:
l
For color vision systems, the white LED ring light should be used.
l
Refer to DataMan documentation for DataMan accessory specifications.
In-Sight Illumination
Accessory
(ISLM-7000-xxx)
Cover is compliant with ANSI Z87.1-2003 Drop-Ball Impact Test (no fracture, 25.4mm
diameter steel ball, vertical drop from 127cm).
In-Sight Autofocus
Module Accessory
(ISAF-7000-8mm)
Number of Focus Cycles: 20,000
Network
Communication
1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP Protocol. Supports
DHCP, static and link-local IP address configuration.
1588 Support
Timestamp Resolution: 8ns
Synchronization Accuracy Through Transparent Clock: 5μs
Serial Communication
RS-232C when connected to the Breakout cable
3
or a compatible I/O module.
Power Consumption
24VDC ±10%, 1.5A maximum.
Power Output
24VDC @ 750mA maximum to external light.
Material
Die-cast and extruded aluminum housing.
Finish
Painted.
Mounting
Four M3 threaded mounting holes. 1/4-20, M6 and flathead mounting holes also available on
mounting bracket accessory (ISB-7000-7K). M4 mounting holes also available on mounting
bracket accessory (ISB-7000-5K).
1
When connected to the Breakout cable, the vision system allows for bi-directional, general-purpose inputs and high-speed outputs for IN 2 /
HSOUT 2 and IN 3 / HSOUT 3. These lines are configured as outputs by default.
2
When connected to the Breakout cable, the vision system allows for bi-directional, general-purpose inputs and high-speed outputs for IN 2 /
HSOUT 2 and IN 3 / HSOUT 3. These lines are configured as outputs by default.
3
If hardware handshaking is required, an I/O module must be used.
82
Specifications
Summary of Contents for In-Sight 7600
Page 1: ...In Sight 7000 Gen2 Series Vision System Reference Guide 2020February06 Revision 5 8 1 2...
Page 42: ...42 Installation...
Page 43: ...43 Installation...
Page 113: ......