7. Optionally, install a bandpass filter to the light baffle.
Tip
: Wear gloves when installing the filter to prevent leaving fingerprints on the surface of the filter.
a. Insert the filter in the light baffle so that it is held in place between the light baffle's filter retention tabs.
b. Push the filter down and snap it into place, ensuring the filter retention tabs are flush with the top surface
of the filter.
8. Install the light baffle.
a. Tilt the light baffle toward the light housing and maneuver the light baffle past the top of the LED ring light
structure.
b. Compress the light baffle and maneuver the bottom of the light baffle past the bottom of the LED ring light
structure until the light baffle snaps into place, with the keyed tabs sitting flush over each light housing
captive screw access hole.
31
Installation
Summary of Contents for In-Sight 7600
Page 1: ...In Sight 7000 Gen2 Series Vision System Reference Guide 2020February06 Revision 5 8 1 2...
Page 42: ...42 Installation...
Page 43: ...43 Installation...
Page 113: ......