Cognex In-Sight 7600, Reference Manual

Page: 18 / 113

DataMan Lenses, Lights and Covers
The following DataMan accessories are also supported with the In-Sight vision system for S-Mount/M12 manual focus
lens configurations. DataMan lenses are only supported with DataMan lights and covers.
Note :
l
The following S-Mount/M12 lenses are supported. If a different lens is used, the following restrictions apply:
l
At infinity focus, the back focal length must be greater than 5.5 mm.
l
Close up, the back focal length of the lens cannot be greater than 10 mm.
l
For the In-Sight 7905, the vision system image circle is larger than the S-Mount/M12 lenses used in the
autofocus module (ISAF-7000-8mm) and the S-Mount/M12 adapter kit (ISLN-7000-SMNT), resulting in
mechanical vignetting in the image when using any S-Mount/M12 lens. Therefore, S-Mount/M12 lenses are
not recommended. For more information, see Mechanical Vignetting on page 110 .
Accessory Part Number Accessory
Image
10.3mm M12 lens with locking (DM300-LENS-10) and 10.3 mm IR M12
lens with locking DM300-LENS-10-IR
16mm M12 lens with locking DM300-LENS-16
25mm M12 lens with lens spacer and hex wrench (also requires
Extension kit) DM300-LENS-25
Extension kit DM300-EXT
Clear cover DM300-CLCOV
Clear cover with white LED illumination DM300-CLCOV-WHI
Diffuse cover with red LED illumination DM300-DLCOV-RE
Diffuse cover with blue LED illumination DM300-DLCOV-BL
Diffuse cover with IR LED illumination DM300-DLCOV-IR
Polarized cover with red LED illumination DM300-PLCOV-RE
18
Introduction