5. Install the new LED ring light.
CAUTION
:
Do not hot-plug the LED ring light. Verify the vision system is not receiving power when
connecting or disconnecting the LED ring light.
a. Place the new LED ring light inside the light housing, with "TOP" oriented upward.
b. Insert the four M2.5 x 6mm screws into the screw holes indicated by a triangle symbol ►.
c. Tighten the screws using a 2mm hex wrench; the maximum torque is 0.34 Nm (3 in-lb).
58
Installation
Summary of Contents for In-Sight 7600
Page 1: ...In Sight 7000 Gen2 Series Vision System Reference Guide 2020February06 Revision 5 8 1 2...
Page 42: ...42 Installation...
Page 43: ...43 Installation...
Page 113: ......