Cognex In-Sight 3400, Manual

Page: 26 / 90

In-Sight 3400 Installation
c.
Tighten the screw terminals with the screwdriver to secure the wire leads in the
terminal.
3. Optionally, connect the DB9 male connector of an RS-232 serial cable to the corresponding
DB9 female connector on the Expansion Module (Figure 2-7).
4. Plug the I/O Module Cable's DB15 male connector into the corresponding female connector
on the Expansion Module.
Figure 2-7: Connecting the I/O Cable and Serial Cable
5. Plug the M12 connector of the I/O Module Cable into the In-Sight 3400 sensor's 24VDC
connector (Figure 2-8).
Figure 2-8: Connecting the Expansion Module to In-Sight
14