Cognex In-Sight 3400, Manual

Page: 61 / 90

Installing the In-Sight
®
3400 Vision Senso r
4.2.8 VGA Connector Specifications
The VGA connector located on the In-Sight 3400 sensor is a standard, analog VGA, DB15
connector. This connection may be used to connect any standard VGA monitor.
Table 4-11: VGA Connector Pin-Out
PIN# NAME DESCRIPTION
1 RED Red Video (75 Ohm, 0.7 V p-p)
2 GREEN Green Video (75 Ohm, 0.7 V p-p)
3 BLUE Blue Video (75 Ohm, 0.7 V p-p)
4 ID2 Monitor ID Bit 2
5 GND Ground
6 RGND Red Ground
7 GGND Green Ground
8 BGND Blue Ground
9 KEY Key (No pin)
10 SGND Sync Ground
11 ID0 Monitor ID Bit 0
12 ID1 or SDA Monitor ID Bit 1
13 HSYNC or CSYNC Horizontal Sync (or Composite Sync)
14 VSYNC Vertical Sync
15 ID3 or SCL Monitor ID Bit 3
49