Cognex In-Sight 3400, Manual

Page: 51 / 90

Installing the In-Sight
®
3400 Vision Senso r
4.1.2 In-Sight 3400 Remote Head Camera Specifications
Table 4-2: In-Sight 3400 Remote Head Camera, General Specifications
SPECIFICATION DESCRIPTION
Sensor 1/3-inch CCD
Optical
Properties 6mm diagonal, 7.4 x 7.4 µ m sq. pixels.
Resolution
(pixels) 640 x 480
Electronic
Shutter Speed 25 µ s to 1000ms (Except value selected must be in
increments of 50ms i.e., 25ms, 75ms, 125ms, etc.)
Rapid reset, progressive scan (supports partial scan),
full-frame integration.
256 gray levels (8 bits/sec).
Gain controlled by software.
Acquisition
Up to 38 frames per second.
Lens Type CS-mount and C-mount (with 5mm extension,
included).
Image
Image
Repeatability
1
±0.01in (0.254mm), (both x and y) from lens
C-mount axis to center of imager.
Material Anodized, cast aluminum housing.
Mounting Three M3 threaded holes.
Dimensions 32mm (1.26”) diameter, 50mm (1.97”) length.
Mechanical
Weight 68g (2.4 oz.) without lens.
Temperature 0° to 50°C (Operating), -30° to 80°C (Storage).
Humidity 95%, non-condensing (Operating and Storage).
Protection IP20 (NEMA 1) Only remote head without lens or
enclosure.
Shock 80G Shock with 150 gram or lighter lens per
IEC 68-2-27. Remote head properly mounted using
Cognex mounting bracket with vibration damper tube.
Environmental
Vibration 10G from 10-500Hz Vibration per IEC 68-2-6 with 150
gram or lighter lens attached. Remote head properly
mounted using Cognex mounting bracket with vibration
damper tube.
Certifications CE, FCC, UL, CUL.
1. Expected repeatability between cameras. This equates to ~ ±34 pixels on a 640 x 480
resolution camera.
39