Cognex In-Sight 3400, Manual

Page: 41 / 90

Installing the In-Sight
®
3400 Vision Senso r
6. In the Set Network Configuration dialog (Figure 2-17), select the first option, “Use The
Following Network Settings For All Sensors”.
Figure 2-17: Set Network Configuration Dialog
7. Enter values for the Subnet mask ; these settings will be applied to every sensor. The
Subnet Mask specifies which parts of the In-Sight 3400 sensor's IP Address are the same
for all hosts on the local network and which are unique to each host. See Table 2-3 or
consult your network administrator for more information.
8. Optionally, enter values for the Default gateway, DNS server and Domain; these settings will
be applied to every sensor.
Default Gateway: Specifies the IP address of the gateway host, if available on the
network. The gateway host is responsible for sending and receiving data between
hosts on different networks.
DNS Server: Specifies the IP address of the host on the network providing DNS
resolution, if available.
Domain: Specifies the network Domain for the host network.
9. Click Next.
29