Cognex In-Sight 3400, Manual

Page: 15 / 90

Installing the In-Sight
®
3400 Vision Senso r
Table 1-1: In-Sight 3400 Standard Component Descriptions
COMPONENT DESCRIPTION
Sensor
(P/N 800-5809-1)
Provides image display, vision processing, serial and
Ethernet connectivity and discrete I/O.
Remote Head Camera
(P/N 800-5808-1) Acquires and sends images to the In-Sight 3400 sensor.
Camera Cable
2M (P/N 185-0085)
5M (P/N 185-0086)
10M (P/N 185-0087)
15M (P/N 185-0088)
Connects the In-Sight 3400 remote head camera to the
sensor. This cable can be identified by its M12 connectors
at both ends.
Breakout Cable
1
2M (P/N 185-0095)
5M (P/N 185-0096)
10M (P/N 185-0093)
15M (P/N 185-0094)
Connects the In-Sight 3400 sensor to an external power
supply, an acquisition trigger source, output devices and a
remote serial device. This cable can be identified by its
M12 connector on one end, and eight wires on the other.
When an I/O Expansion Module or Breakout Module is
used, the I/O Cable supplied with the module replaces the
Breakout Cable.
Network Cable
1
5M (P/N 185-0084)
10M (P/N 185-0092)
15M (P/N 185-0097)
30M (P/N 185-0089)
Connects the In-Sight 3400 sensor to the factory network.
This cable is a CAT5/5e standard, straight-pinned
Ethernet cable, and can be identified by its M12 connector
on one end and standard RJ-45 connector on the other.
Crossover Coupler
(P/N 185-0080) Attaches to the RJ-45 connector of the network cable to
provide crossover CAT5/5e cable functionality when
connecting the In-Sight 3400 sensor directly to a PC or
other In-Sight sensor.
Control Pad
(P/N 800-5746-1)
Used to navigate and configure the In-Sight spreadsheet
user interface. Attaches to the In-Sight 3400 sensor via
DB15 male connector.
Remote Head
Accessory Kit
(P/N 800-5813-1) Includes remote head camera mounting hardware and a
5mm extension ring (for use with C-mount lenses).
1. When you receive a Breakout cable or Network cable from Cognex, the cable bag is labeled
with a CCB-84909-xxxx-xx product number and a Cognex 185-xxxx part number. The cable
is tagged with an 84909-xxxx cable number.
1.4 In-Sight 3400 Sensor Configurations
The In-Sight 3400 sensor can operate as a standalone sensor, or as a host sensor on a factory
network. For the purposes of the instructions in this manual, a network is an In-Sight 3400 sensor
connected over Ethernet to at least one other In-Sight sensor or PC running In-Sight software.
These configurations may require additional components, such as an Ethernet switch or VGA
display. Many optional components may be purchased directly from Cognex. A complete catalog
of In-Sight products and accessories is available on the Cognex web sight at:
www.cognex.com/pdf/downloads/In-Sight-brochure.pdf .
3