29
English
This function may be useful should you need to power up the
ProSpot 150 LX
inside its roadcase, or for any other reason where you
may wish to power the unit up without it moving.
1) Power up the projector whilst simultaneously pressing the
menu
,
enter
and
–
buttons
.
he projector will perform the usual reset
functions on every motor barring the pan and tilt motor, which will remain static throughout the reset procedure.
2) You may at this point alter a DMX address, or any other menu-based parameter
without projector articulated movement.
3) To resume normal
ProSpot 150 LX
functioning, you must turn the projector off and
on again via the
power
button or by effecting a reset.
The electronic counter should be reset to zero hours every time the lamp is changed in order to provide accurate information about
lamp life
1) Turn off the projector.
2) Power up the
ProSpot 150 LX
whilst holding both the
+
and
–
buttons simultaneously.
The projector will have effected a reset of the
LIFE
lamp-life counter.
To verify that the counter reset has been undertaken:
1) Press the
menu
button, the projector will show
MODE
2) Press the
+
or
-
button until
MEAS
is displayed
3) Press the
enter
button
4) Press the
+
or
-
button until
HOUR
(for hour) is displayed.
5) Press the
enter
button
6) Press the
+
or
-
button until
LIFE
(lamp life) is displayed.
7) Press the
enter
button; the display will show
0000
confirming that the counter has been reset.
N.B. You may also verify that the other counters
LIFS
(cumulative lamp life for all lamps installed) and
UNIT
(number of hours of
fixture operation) have remained unaltered.
An internal 4 point encoder system allows the
ProSpot 150 LX
to return to its correct position in case the unit is accidentally knoc-
ked
out of alignment whilst operating. This is particularly useful if the projector is to be mounted on the floor in a position where the
performer or artist may accidentally bump the unit.
O N
sensors activationi
O F F
sensors deactivation
☞
enter
☞
+
o
–
☞
+
o
–
☞
enter
☞
enter
☞
menu
AOO1
MODE
FUNC
☞
+
o
–
O P T O
optic sensor deactivation
Return in position of the unit if accidentaly knocked
out of place and ability to disable. Mechanical reset of
the unit (opto OFF).
☞
enter
19. Automatic position realignment
A00 I
menu
enter
+
function display
(+) e (--) variano l'indirizzo DMX, (enter) registra. Per selezionar
zione premere (menu). (menu) 2 volte, riporta il display a defa
To change DMX address use (+) and (-); to record press (enter).
ect a function press (menu). To escape a function press (menu)
18. Resetting the electronic counter
menu
enter
+
function display
(+) e (--) variano l'indirizzo DMX, (enter) registra. Per selezionar
nzione premere (menu). (menu) 2 volte, riporta il display a defa
To change DMX address use (+) and (-); to record press (enter)
lect a function press (menu). To escape a function press (menu)
I I I I
17. Turning on the ProSpot 150 LX without articulated movement
