5
English
ProSpot 150 LX
utilises a Philips CDM-SA/T 150W, mastercolour or equivalent.
The lamp is available from your authorised
coemar sales agent
:
coemar code
105500
power
150 w
luminous flux
12.900 lm
colour temperature
4.200° K
base
G 12
approximate lamp life
6000 hours
The fixture’s internal temperature may reach 150° C after 5 minutes, with a maximum peak of 350° C. Ensure the lamp is cold prior
to attempting removal. The fixture should be allowed to stand and cool for 10 minutes prior to its removal.
CDM lamps are part of the mercury vapour family of discharge lamps and must be handled with great care. the lamp operates at
high pressure, and the slight risk of explosion of the lamp exists if operated over its recommended life.
We recommend, therefore, that the lamp be replaced within the manufacturer’s specified lamp life.
installing the lamp
1) Using a Philips head screwdriver, remove the 2 screws (
A
) which affix the lamp assembly to the rear of the projector.
2) Remove the lamp assembly (
B
).
3) Locate the lampholder (
C
)
Attention
Turn off the power prior to opening up the unit.
4. Lamp: installation and replacement
