8
English
mounting
ProSpot 150 LX
may be installed in any position.
The structure from which the unit is hung should be of sufficient rating to hold the
weight of the unit, as should any clamps used to hand the unit.
The structure should be sufficiently rigid so as not to move or shake whilst the
ProSpot 150 LX
moves during its operation.
The 2 Ø14 mm mounting holes in the base (
A
) allow the unit to be mounted using
appropriate clamps, or other means, on suitable structures.
Never install the unit where unauthorised or untrained personnel may tamper with
the projector.
safety chain
The use of a safety chain affixed to the
ProSpot 150 LX
and to the primary suspen-
sion point is highly recommended. Attach the chain to the ring (
B
) located at the
rear of the base of the unit, and to the primary suspension point to protect against
the accidental failure of the unit’s main suspension point.
If using an after-market safety chain not manufactured by
coemar
, ensure that it
is of sufficient rating to hold the weight of the unit.
movement
DO NOT
obstruct the articulated movement of the projector by placing objects in the path of its moving components.
310
m
m
12,20”
6. Installation
