Code PHANTOM 1024, User Manual

Page: 38 / 46

Phantom_1024_V2.023_en.PDF http://www.codelight.com 32
8.2.1.2.3. Senior Parameter Setup
There are three parts of Senior Parameter Setup, which are Channel Type, Locate
Data and Invert Channel.
Note! If not clear the parameter below, please do not amend it optionally!
Press S4 [Advanced option];
Use
、
buttons to select the needed parameter
Press S1 to adjust the type of channel:
H
－
HTP dimming channel
s
－
run the high 8 bit channel of the 16 bit LTP gradually
L
－
run the LTP channel gradually
S
－
run the high 8 bit channel of the 16 bit LTP immediately
I
－
run the LTP channel immediately
Press S2 to set the value of the fixture when it is turned on, Input the number directly,
confirm it by pressing Enter;
Press S3 can invert the output value.
8.2.1.3. Edit User-defined Fixture
You can edit the parameters of the user-defined fixtures in the user fixture library.
Note! If the fixture is used in Playback, delete or edit it may lead to a running error of Playback!
View the user fixture library;
Use
、
buttons to select the needed fixture;
Press S2 [Edit existed Fixture], the edit is the same as the way to edit the newly added
fixture;
Press S6 [Confirm] to enter the edit menu.
8.2.1.4. Delete User-defined Fixture
You can delete the user-defined fixture.
Note! If the fixture is used in Playback, delete or edit it may lead to a running error of Playback!
View the user fixture library;
Use
、
buttons to select the needed fixture;
Press S4 [Delete a Fixture];
Press S6 [Confirm] to delete;
Press Setup to exit and return to “Live Show Mode”.