Code PHANTOM 1024, User Manual

Page: 29 / 46

Phantom_1024_V2.023_en.PDF http://www.codelight.com 23
6.5.3. Speed of Chase
When you create a Chase, the console will give a default time for each Chase step automatically. If you
need to change the time of each Chase step, press [Set Step Time] and enter the step Number needed to edit
by the Playback button. Then use the Soft-key to choose the Time option and input the time by second.
Once you change the time of the steps, the console will save it. So, if you edit time by [Edit Time] under
“Live Show Mode”, the edit can not change the step time setup by [Set Step Time]. Other step not edited by
[Set Step Time], which remain the default time will change according to the new edit by [Edit Time]. But
you can use control wheels to edit all the steps, no matter whether they are edited by [Edit Time] or [Set
Step Time], it will change the time of all steps pro rata.
If you hope the time of every step to be identical, we suggest you not to edit any step time by [Set Step
Time]. You’d better edit the step time by [Edit Time] under “Live Show Mode” after programming.
6.6. Change Playback Page
Use the
、
button of Playback page to change the page number. Turning to other page means turning to
another 15 programs.
When you fade in a program and change the Playback page while it’s running, the program will keep running and
not be replaced by the new Playback page.
If some Playback button leds are twinkling after changing Playback page, it means the corresponding Playback
faders saved the same programs as those faders before changing pages. If you need to run the programs of the new
page, you have to fade out the previous program and fade in again, thus the fader will show the new program after
changing the page.
6.7. Run Playback
It’s easy to run a Playback. Select the page of the Playback, and fade in the Playback. When running several
playbacks, on the bottom of LCD will display which playback is running, press Shift + Playback button can
change the present state of Playback. You can use control wheel to change the speed of the running Playback. For
example, Chase is replaying, you can set up the music trigger, pause, the direction of running and etc.;
When Chase is replaying, you can use music trigger to make the program follow the bass beat, or you can pause
anytime you like, or change the direction of Chase.
Playback allow to run different attributesof one fixture. For example, you can use a fader to run a group of
fixtures moving, another fader to make those foxtures change colour or gobo, you can mix them if needed.
Use a Playback fader to replay a Chase;
Press Shift + the Playback button to set it as the current state;
Press Music Trigger, then the led of the Playback button will be turned on and the Chase steps will follow
the rhythm of the music. Press again, the led will be off, and the Chase steps will run as the preset speed;
Press Pause can stop the Chase and stay at the current step. Press again will continue the Chase. Note: if
the Chase step contains Effects, the Effect will run continuously.
Press Go+ and Go- to change directions of the Chase.