Code PHANTOM 1024, User Manual

Page: 18 / 46

Phantom_1024_V2.023_en.PDF http://www.codelight.com 12
3.3. Manual Control of Dimmer Channels
It’s very easy to control dimmer Channels manually. You only need to fade in the patched Unit fader, then the
patched DMX channels will sent out the brightness signals to the dimmer.
If you need to control more than one dimmer channels at one time, you select the Unit buttons and press Attribute
button of the dimmer first, then use the control wheels to adjust the level.
3.4. Manual Control of Fixtures
It’s also very easy to control fixtures manually. Firstly, you choose the fixture, one or more at one time.
Select the fixtures in the Unit section;
Press the button Locate to enter “Fixture Locate” menu;
Press S1 [Locate Fixture] to open white beam, central position for the unit of selected.;
Press S2 [Locate Fixture no PAN/TILT] to open white beam without change the fixture's PAN/TILT.
Select Attribute button in the Attribute section and use control wheel A or B to control the attributes of the
fixtures.
The preset attribute values of some fixtures are saved in Preset section. When the fixtures are turned on, you can
press A1-A10, B1-B10, C1-C10 in the Preset section to use various Attribute values you need. (e.g. Colour, Gobo
and Location)
After adjusting attributes values of the fixtures, like the Location, colour or gobo, you can run the selected
fixtures with the internal Effects of the console.
3.5. Run Macro
Macro is a sequence of fixtures program, which run with time parameter. Some of the fixtures can run the special
operation, such as Reset, Lamp On/Off. After patched, the macro function of the fixtures which is patched from
system library, will be set to the console automatic. If you want to check whether the fixtures have macro or to
run the macro, please operate as follow;
Select the fixtures in Unit section;
Press Locate to enter “Fixture Locate” menu;
Press S5 [Macro Function], the LCD screen will display the macro function if the fixtures have;