COBHAM Sailor 900 VSAT, Technical Manual

Page: 42 / 356

Unpacking
3-2 Chapter 3: Installation 98-133966-G1
3.1.2 Initial inspection
Inspect the shipping cartons and wooden box immediately upon
receipt for evidence of damage during transport. If the shipping
material is severely damaged or water stained, request that the carrier's
agent be present when opening the cartons and wooden box. Save all
box packing material for future use.
After unpacking the system, i.e. removing the top and sides of the
wooden box and opening the cartons, inspect it thoroughly for hidden
damage and loose components or fittings. If the contents are
incomplete, if there is mechanical damage or defect, or if the system
does not work properly, notify your dealer.
3.1.3 Tools needed
• Unbraco key (5 mm), included, mounted on a tool holder inside the
radome.
Other tools that may be needed during the installation:
• Torx TX20 to open the locks of the service hatch
• Wrench to fasten the mounting bolts for the ADU
• Wrench to fasten the N connector at the ADU
• PC and Internet browser
• Crimping tools
For tools needed when replacing modules you find a list of tools needed
for each module in the chapter
Service & maintenance
.
WARNING!
To avoid electric shock, do not apply
power to the system if there is any sign of shipping
damage to any part of the front or rear panel or the outer
cover. Read the safety summary at the front of this
manual before installing or operating the system.
SAILOR900TM.book Page 2 Monday, September 16, 2013 11:01 AM