COBHAM Sailor 900 VSAT, Technical Manual

Page: 127 / 356

Configuration with the web interface
98-133966-G1 Chapter 6: Configuration 6-43
6666
Configuration
2. For each item under
ALLOW USERS TO:
select
•
Yes
to allow access
•
No
to block access to the settings. Then the pages are read-only,
changes cannot be made by non-administrator users.
Change network
: Change IP configuration of the LAN connectors.
For further information see Configuring the LAN network on page 6-
28.
Change email settings:
Change e-mail addresses for sending
reports. For further information see E-mail setup on page 6-31.
Modify XIM data
: Only used during service and maintenance. For
further information see Updating VIM/PCM calibration data on
page 8-94.
3. Click
Apply
.
The settings to which access is denied are now greyed out for the non-
administrator user.
6.3.10.4 Importing and exporting a system
configuration
If you need to reuse a configuration in another SAILOR 900 VSAT
system, you can save the current configuration to a file, which can then
be loaded into another SAILOR 900 VSAT. You can also use this feature
for backup purposes.
The configuration file contains all the settings you have entered during
system setup: satellite profiles, modem profiles, LAN setup, blocking
zones, etc.
Figure 6-36: Web interface: ADMINISTRATION, User permissions
SAILOR900TM.book Page 43 Monday, September 16, 2013 11:01 AM