8
Manual P/N: 192052171 Rev AA
May 2018
(ENGLISH)
ENGLISH
REPAIR PARTS LIST
Using “Commercial” or other manufacturer’s parts to repair the CM
Series 622A Hoists may cause load loss.
TO AVOID INJURY:
Use only CM supplied replacement parts. Parts may look alike but
CM parts are made of specific materials or processed to achieve
specific properties.
ORDERING INSTRUCTIONS
The following information must accompany all correspondence
orders for replacement parts:
1. Hoist Model Number from identification plate.
2. Serial number of the hoist stamped below identification plate.
3. Length of lift.
4. Part number of part from parts list.
5. Number of parts required.
6. Part name from parts list.
NOTE: When ordering replacement parts, it is recommended
that consideration be given to the need for also ordering such
items as gaskets, fasteners, insulators, etc. These items may
be damaged or lost during disassembly or just unfit for future
use because of deterioration from age or service.
RECOMMENDED SPARE PARTS
To insure continued operation, it is recommended that two friction
washers
for each Series 622A Hand Hoist in service be kept on hand at all
times to replace friction washers that are worn, contaminated or
glazed. See below
for ordering information.
Brake Set
Friction Washer
Latch Kit
Upper & Lower Hook Assembly
Alterations or modifications of equipment and use of any parts other
than CM
®
622A Series lever hoist repair parts can lead to dangerous
operation and injury.
TO AVOID INJURY:
Do not alter or modify equipment. Do use only CM
®
622A Series
provided replacement parts.
Summary of Contents for 2208A
Page 13: ......
