4 4
1.3.29 Set Audio Port IP Address Configuration
The Set Audio Port IP Address Configuration command configures the IP address for the
audio (Dante) port of the device. The IP address, subnet mask and gateway IP address
can be configured. Dynamic addressing (DHCP or APIPA (Auto IP, 169.254.x.x)) can be
selected by using addresses of all 0’s. The new configuration will take effect the next
time the device is booted.
There are three parameters to this command: the IP address, the subnet mask and the
gateway IP address.
The following command configures the audio port IP address to
192.168.47.213, the subnet mask to 255.255.255.0 and the gateway IP
to 192.168.47.1:
SETAUDNET 192.168.47.213 255.255.255.0 1
92.168.47.1<CR>
Response:
ACK SETAUDNET 192.168.47.213 255.255.255.0
192.168.47.1<CR>
The following command configures the audio port to use dynamic
addressing (DHCP/APIPA):
SETAUDNET 0.0.0.0 0.0.0.0 0.0.0.0<CR>
Response:
ACK SETAUDNET 0.0.0.0 0.0.0.0 0.0.0.0<CR>
1.3.30 Get Audio Port IP Address Configuration
The Get Audio Port IP Address Configuration command returns the configured IP ad-
dress settings for the audio (Dante) port of the device, including the IP address, subnet
mask and gateway IP address. If dynamic addressing is configured, addresses of all 0’s
will be returned. Please note that the values returned by this command are the settings
that have been programmed to be used on the next reboot, not the currently assigned
IP address, subnet mask and gateway IP address.
The following command returns the configured audio port IP
address settings, when the IP address is static:
GETAUDNET<CR>
Response:
ACK GETAUDNET 10.10.10.62 255.255.255.0
10.10.10.1<CR>
The following command returns the configured audio port IP
address settings, when the IP address is dynamic:
GETAUDNET<CR>
Response:
ACK GETAUDNET 0.0.0.0 0.0.0.0 0.0.0.0<CR>
Summary of Contents for CDT100 MK3
Page 28: ...2 8 API SPECIFICATION...
