1 7
CDT100 MK3 DANTE AUDIO SETUP
Confi gure the audio routing via the Dante Controller (available for Windows
PCs and Mac OSX).
Each CDT100 MK3 will appear on the Dante network with a unique name for
identifi cation and routing. The default naming will be CDT100MK3-######
with the # replaced by the last six digits of the device’s MAC address.
The CDT100 MK3 is capable of sending 4 separate channels of audio (mic
inputs) over a Dante network and receiving 2 channels of audio (outputs)
form the Dante network. Using the Dante Controller, each available channel
can be routed to a connected DSP unit, mixer, or mixing amplifi er.
CONFIGURING IP ADDRESSES
By default, each device in the Dante Network will automatically be assigned
an IP address.
If the IP addresses are not confi gured properly, the CDT100 MK3 may
show up in the Dante controller, but input and output channels may not be
available for routing.
DOWNLOAD the Dante Controller from Audinate at www.audinate.com.
Dante Controller is a free software application that enables you to route
audio and configure devices on a Dante network.
Summary of Contents for CDT100 MK3
Page 28: ...2 8 API SPECIFICATION...
