6
FEATURE OVERVIEW
• RGB LED control for all Clockaudio RGB LED touch switches.
• 3 logic input pins on each TS port (pins 1, 5 and 8).
• Easy to install with under table mounting flanges.
• Audio and control signals transported over a single network cable.
• 4 balanced mic inputs using 3-pin terminal block connectors.
• Ava48V phantom power to each mic input.
• Powered by an external reg12VDC power supply (sold
separately).
• The 4 TS (Touch Switch) connections are fully backward compatible
to all previous Clockaudio bicolor touch switches. The ARM-C port
provides direct connection to the ARM motorized microphone controller
or CCRM4000.
• The CDT100 MK3 features two network connections for Dante Daisy
Chaining. This simplifies system infrastructure wiring, allowing a single
network cable home run for multiple CDT100 MK3 units.
• Power can also be daisy chained, up to 6 units (additional power
considerations are required).
• Compatible with any Dante or AES67 capable audio DSP or other Dante
enabled device.
• The CDT100 MK3 can be controlled and monitored with 3rd party
control modules using direct UDP messages. Parameters that can
controlled include:
• Phantom Power On/Off
• ARM-C Up/Down
• LED Status and Brightness level
• Button Status
IN THE BOX
• CDT100 MK3 Unit
• Quick start card
• 6x 3POS terminal block
• 2x 2POS terminal block
• 2x #6 wood screws
Summary of Contents for CDT100 MK3
Page 28: ...2 8 API SPECIFICATION...
